How To Replace Water Filter In Samsung Refrigerator

Samsung refrigerators are equipped with filters to purify h2o or deodorize. When the maximum usage limit is reached for each filter, a red light volition appear informing you that y'all accept to replace the filters. Check out the instructions below for replacing the water purifier filter. It is also good to check the user manual of your refrigerator for further information.

When the h2o filter indicator is lit on the display panel

The water filter indicator light is preset to turn orange afterward five months or 450 gallons, and red subsequently six months or 500 gallons.
To reset the water filter indicator, you need to supervene upon the filter and reset the role on the command panel. Depending on the given model, the light can be either green or bluish.

indicator displays replace the water purifier filter

Annotation:

The actual design of the display console may differ depending on the type of model that you have.
This image is a reference in English but is available in the linguistic communication of your country.

How to replace the water purifier filter

In order to ever receive clean and germ-free water or ice, it is recommended to replace the filter immediately when the filter replacement sign appears on the display panel. Later replacing the filter, it is recommended to use the water after pouring out over 500ml.

When replacing the water filter, you must outset close the h2o supply valve. Once you complete the replacement, brand sure the h2o supply valve is turned back on.

Pace i. Printing and hold the Water ice Type/Filter Alter button on the control panel for three seconds to reset the filter.

Step 2. Open the filter cover and turn the water filter counterclockwise. Pull the water filter from the case.

Step three. Insert a new filter into the filter case and turn it clockwise until information technology locks.

how to replace the water purifier filter

Note:

This prototype is just a sample in English and is available in the language of your country.
Keep the filter cartridge horizontal when pulling it out.

Reset the filter indicator light later replacement

After replacing with a new filter, the filter replacement cycle must be reset again past pressing and holding the alert push for 3 seconds. Excellent performance and proper replacement cycles are ensured. When reset, the color of the filter indicator changes from red to green (or the words Supercede Filter will disappear).

make sure to reset the filter indicator light

Notation: This prototype is but a sample in English language and is available in the linguistic communication of your country.

How to notice a serial number on your refrigerator Click to Expand

To supplant the filter, you need to check the respective serial numbers corresponding to each filter for your refrigerator model. All Samsung refrigerators accept labels placed on ii areas on the exterior of the product.

The serial number can be easily found past opening the upper left door on the front, or the lower left side.
The model name and serial number of your refrigerator are printed on the label.

You tin find a list of the available filters by contacting the customer service center or past purchasing a filter online by entering the refrigerator series number.

check the serial number of your refrigerator